www.Agilent-Tech.comProductsServices & Supportwww.HP.com
Agilent-Technologies LogoSemiconductor Products
Search
Assistance
SPG home
 HPRFhelp home
 Markets
  Cordless

 DECT
  description
  specifications

 What's New
 How to Buy
 
DECT

Digital European Cordless Telecommunications
European standard for cordless telephones

 

  lna mixer if  
  LNA Down Converter IF  
  switch pll baseband  
  T/R Switch PLL Baseband  
  pa driver mod  
  Power Amp Driver Modulator  
  Required Functions & Agilent Technologies products  

Agilent Technologies supplies:
solid state RF components in the mobile unit and base stations

Agilent Technologies Wireless DECT/WLAN RF chipset solutions RF Chipset solution for DECT


DECT Rx-LNA top

Detects and amplifiers incoming signal
[1800 MHz, NF1-2 dB, Ga 12-20 dB; <3 volt operation]

3V:
Discrete Bipolar Transistors: HBFP-0405, HBFP-0420, AT-320, AT-310, AT-305
Discrete GaAS FETs: ATF-21186
Integrated Circuits: MGA-85563, MGA-87563


DECT Rx-Down Converter top

Converts output of LNA to IF frequency
[1800 MHz to 100 MHz conversion, <3 volt operation]

3V:
IAM-91563 HPMX-5001 includes this function


DECT Rx-IF top

Low frequency amplification
[~100; <3 volt operation]

3V:
INA-30311 can be used as IF amplifier

HPMX-5002 performs IF amplification plus demodulation and data slicing


DECT T/R Switch top

provides isolation between transmit and receive paths
[1800 MHz, <3 volt operation]

HSMP-3860, HSMP-3890 PIN diodes


DECT PLL top

Provides stable carrier for frequency conversion and/or modulator
[architecture dependent, <3 volt operation]

The HPMX-5001, HPMX-5002 chipset includes some PLL functionality Individual components: oscillator : AT-320, AT-310, AT-305

buffer : AT-320, AT-310, AT-305
INA-31063

prescalers: no Agilent Technologies products

phase comparator: no Agilent Technologies products


DECT Baseband top

provides data inputs to modulator, converts output of IF into information

HPMX-5002 includes part of this function


DECT Tx-Power Amplifier top

amplifies outgoing signal for broadcast, sets to correct power level
[1800 MHz, <30 dBm Pout, <3 volt operation]

AT-380xx, AT-420xx, ATF-21186 for power to 100 mW

MGA-83563, MGA-82563, MGA-81563

HSMS-28xx detector diodes for power control


DECT Tx-Driver top

"glue" part that amplifies modulator output sufficiently to drive power chain
[1800 MHz, 0 to 10 dBm Pout, <3 volt operation]

MGA-81563
AT-32011


DECT Tx-Modulator top

combines data with carrier
[1800 MHz, constant envelope phase modulation of moderate linearity; <3 volt operation]

The HPMX-5001 and HPMX-5002 chipset includes the modulator functionality

for systems using modulated VCO,
AT-415, AT-320, AT-310, AT-305 as oscillator

for systems using IQ modulation,
HPMX-2007


Privacy Statement Terms of Use

this page last updated: 1 October 1999