www.Agilent-Tech.comProductsServices & Supportwww.HP.com
Agilent-Technologies LogoSemiconductor Products
Search
Assistance
SPG home
 HPRFhelp home
 Products
 BJTs
  FETs & PHEMTs
 Function
  Oscillator

 Select by Apps
  LNA
  Gain Stage
  Buffer
  Driver / PA
  IF Amp
  Oscillator
  Mixer
 Select by Spec

 What's New
 How to Buy
 
Transistor Application Selection Guide
Oscillator
 
    RF to 900 MHz RF to 2.5 GHz RF to 6 GHz RF to 18 GHz
  HBFP-0420 gen pur 3V gen pur 3V gen pur 3V low phase noise to 10 GHz
  AT-310xx gen pur 3V gen pur 3V gen pur 3V low phase noise to 10 GHz
  AT-414xx     high gain 3-8V low phase noise to 8 GHz
  HBFP-0405 low pwr 3V low pwr 3V low pwr 3V low phase noise to 12 GHz
  HBFP-0450 mod pwr 3V mod pwr 3V mod pwr 3V  
  AT-320xx mod pwr 3V mod pwr 3V mod pwr 3V  
  AT-415xx gen pur 3-8V gen pur 3-8V gen pur 3-8V  
  AT-420xx mod pwr 3-8V mod pwr 3-8V mod pwr 3-8V  
  AT-305xx low pwr 3V low pwr 3V low pwr 3V  
         
  ATF-13xxx     low noise GaAs low noise GaAs
  ATF-10xxx     low noise GaAs  
  ATF-36xxx       low noise PHEMT
  ATF-35xxx       low noise PHEMT
  ATF-34xxx     low noise PHEMT low noise PHEMT
  ATF-38xxx     low noise PHEMT low noise PHEMT
  ATF-26xxx     high Vbr GaAs high Vbr GaAs
  ATF-21xxx     pwr GaAs  
         
  markets Cellular & Cordless
900 MHz ISM
 LAN/modem
 RF Tag & reader
Mobile Radio (SMR)
CATV
pagers / messaging
GPS (1.5 GHz)
PCN (1.8 GHz)
USPCS (1.9 GHz)
MMDS (2 GHz)
2.4 GHz ISM
 LAN/modem
 RF Tag & reader
TVRO (4 GHz)
WLL (4 GHz)
5.8 GHz ISM
 LAN/modem
 RF Tag & reader
DBS/DSS (12 GHz)
VSAT (12 GHz)

Preferences:1. BJTs (least expensive, lowest phase noise)
  HBFP-0420, HBFP-0405
  AT-320xx, AT-310xx, AT-305xx
  AT-415xx, AT-414xx, AT-420xx
  2. low noise FETs (low power oscillators above 6 GHz, next best phase noise to BJTs)
  ATF-36xxx, ATF-35xxx, ATF-13xxx, ATF-10xxx
  3. general purpose MESFETs (higher breakdowns for medium power oscillators above 6 GHz)
  ATF-21xxx, ATF-26xxx

osc Function: creates AC frequency from DC inputs
 
Operation: Bias for Pout input matched for |S22'| > 1 output matched to 1/S22'
 
Key Parameters P out: -10 to +15 dBm  
and ranges: Phase Noise: -60 to -120 dBc/Hz @ 10 kHz  

Privacy Statement Terms of Use

this page last updated: 20 October 1999